Jump to content

Bullitt

Members
  • Content Count

    6
  • Donations

    $0.00 
  • Joined

  • Last visited

Everything posted by Bullitt

  1. Hi Fallen, Thanks for the reply. I'm making good progress albeit slowly. I now have both stable and openbeta versions with all my modules installed including Tacview and DCS-SRS. Not sure how to configure DCS-SRS though. Also I have figured out how to install and configure the Integrated TARGET Profile and GUI for Cougar/Warthog and MFDs by HomeFries and a TIR profile from GrowlingSidewinder. Next step is to check all is working as intended and undergo refresher training using in-game tutorials. See you in the sky soon! Sizzler (ex 104th_Bullitt) S!
  2. Hi 104th Phoenix members, Many years ago say (I'd say around 2008/2009) I was a member of the 104th Phoenix with #67 as my tail number. I see Mustang now flies it proudly on his jet I'm just about ready to get back into flying the best looking sim out there but things have moved on at an alarming rate since Lock On Flaming Cliffs 2 and I need some help in setting up DCS World. So far I have installed DCS World (release version only) along with all my modules that I bought to support Eagle Dynamics since release of DCS World but have been lying dormant all these long years! I have installed TeamSpeak and now go by the name Geeman_Sizzler. I have my HOTAS Cougar and TrackIR installed but no profiles to get them to work with DCS World. I'd love to fly on the 104th server again and meet up again but I would appreciate some help with the next steps. Regards Sizzler
  3. Hi all, I rebuilt my pc a couple of years ago based on an asus z170a, intel 6600k with 16gb ram with both ssd and hdd storage but never got round to upgrading the gpu due to running out of funds. I'm only interested in playing DCS at near to max settings on 1080p (maybe higher in the future with a new monitor) so which nvidia gpu should I buy for DCS (suggestions for a specific brand/make and model) with say a budget of £500. Cheers Bullitt
  4. Polecat, I am hearing reports that logitech gaming software/setpoint is causing BSODS on z170 chipset...I know you like Logitech and was interested to know if you have had any issues or how you overcame such problems Bullitt
  5. Hi all, Just starting to research (and save for) a new rig due to a suspected blown motherboard!!! Thinking of following in Polecat's footsteps with this as a starting point...all comments/suggestions much appreciated. ASUS Z170-A (slight concern about reviews regarding heat sinks not using screws and that the board is wafer thin)INTEL i7 6700K or i5 6600K (just spoken to my system builder - he has suggested the i5 6600K)CPU COOLER - TBC (any help on this would be welcome - it needs to have a low profile as space is required for the side fan assembly) (again advised by system builder to go for the CORSAIR H50 but also considering COOLER MASTER Sedion 120V)G SKILL "Ripjaws 4" DDR4-3000 (PC4-24000) 16GB (dual channel kit 8GB x 2) QVL approved ref. no. F4-3000C15D-16GRKCRUCIAL MX200 M2 Type 2280 single sided 250GB (boot/system drive - not sure if this is possible or worthwhile to run raid 0 with 2 ssd (CRUCIAL BX200) use existing COOLERMASTER Stacker 830 NVIDIA Special Edition (rear fan plus 6 x 120mm fans - 1 front 4 side and 1 top)use existing OCZ Technology Z series 1000W modular power supplyuse existing EVGA NVidia GeForce GTX 550Ti (2 x 2MB in SLI configuration) to be upgraded lateruse existing CREATIVE X-Fi XtremeGamer Platinum Fatal1ty Champion (might not be needed but have always preferred a dedicated sound card)use existing CRUCIAL BX200 SATA 6Gb/s 480GBuse existing SEAGATE Barracuda SATA 3Gb/s 500GB x 4 (2 TB) to be upgraded lateruse existing LG Super Multi DVD Rewriter (GH22LS70) and Blu-ray Disc Rewriter (BH10LS30)use existing SONY multi-card reader/writerRegards Bullitt
  6. Hi Polecat Would be great to know procedures for install of cougar, track ir etc on windows 10 Regards Bullitt
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.